Compact air purification for the xTool F2

The xTool F2 Air Purifier Go has been developed exclusively for the xTool F2. It attaches directly to the back of the machine, eliminating the need for a separate connecting hose between the laser and the purifier. This creates a clean, compact and easily portable setup.

Weighing only 1.34 kg, the Air Purifier Go is ideal for mobile applications such as craft fairs, markets, events, workshops and on-site personalisation. Its compact design also requires very little additional space in a shop or studio.

Automatically adjusted airflow

The airflow automatically adapts to the selected processing mode, such as engraving or cutting. There is no need to adjust the extraction power manually. Once connected to the xTool F2 and powered on, the purifier is ready for use.

Four-layer filtration

The integrated four-layer filtration system helps reduce smoke particles, dust and odours produced during laser processing. This provides a cleaner and more comfortable working environment for both mobile and studio-based use.

Simple, button-free operation

The Air Purifier Go has no separate control buttons. Its operation is automatically controlled by the xTool F2. Replacing the integrated filter and G4 filter cotton is also quick and straightforward.

For frequent daily use, xTool recommends replacing the integrated filter approximately every two weeks. Actual filter life depends on the materials processed, the amount of smoke and dust generated and the frequency of use. Materials that produce heavy dust or strong odours may shorten the filter’s service life.

Key features

• Designed exclusively for the xTool F2

• Integrated, pipe-free design

• Fits directly onto the back of the xTool F2

• Automatically adjusts airflow to the processing mode

• Four-layer filtration system

• Helps reduce smoke, fine particles and odours

• Compact, lightweight and easy to transport

• Weighs only 1.34 kg

• Noise level below 63 dB

• No manual controls required

• Easy-to-replace integrated filter and G4 filter cotton

• Ideal for shops, studios, workshops, craft fairs and events

• CE, FCC and RoHS certified

Technical specifications

• Product: xTool F2 Air Purifier Go

• Compatibility: xTool F2 only

• Filtration system: four layers

• Weight: 1.34 kg

• Noise level: below 63 dB

• Operation: automatically controlled by the xTool F2

• Airflow adjustment: automatic according to the processing mode

• Operating temperature: 0–35°C

• Recommended relative humidity: 40%–80%

• Filter type: replaceable integrated filter with replaceable G4 filter cotton

• Certifications: CE, FCC and RoHS

Package contents

• xTool F2 Air Purifier Go

• Integrated filter

• G4 filter cotton

• DC power splitter cable

• Screw

• Washer

• Sealing ring

• Quick Start Guide

• Safety Instructions

Compatibility

This air purifier is compatible exclusively with the xTool F2. It does not work with other xTool machines or machines from other brands.

Maintenance

Check the G4 filter cotton regularly and replace it when it becomes visibly dirty or saturated. Replace the complete integrated filter when suction decreases, the filter becomes blocked or the software indicates that replacement is required. After installing a new integrated filter, reset its operating time in the xTool software.

The purifier does not remove all harmful substances. Always ensure adequate ventilation and follow the relevant safety instructions for the materials being processed.